Lukas MSM-2D mobile control module Manual de usuario descargar pdf (Pagina 7)

Proper use4.

Accessories and spare parts for the device can be obtained from your authorised LUKAS

dealer!

The Mobile Selection Manifold is designed specically to control the piston movement of

LUKAS hydraulic cylinders (without independent control valve).

The Mobile Selection Manifold makes it possible to sensitively control the extension and

retraction movement of the hydraulic cylinders in order to raise an object at two contact

points with the pistons having the same travel speed (even when the load distribution of the

object to be raised varies).

It is used, for example, in the event of trafc accidents, train crashes, building collapses, etc.

In principle, nearly all hydraulic cylinders without an independent control valve can be driven

or their piston travel speed controlled without an independent control valve.

WARNING / CAUTION!

All objects that are to be moved need to be secured via xed brackets or by using

substructures. In addition, it needs to be ensured that the hydraulic cylinders used

cannot slip away.

WARNING / CAUTION / ATTENTION!

The hydraulic cylinders may not be placed against:

- live cables

- explosive elements such as air bag cartridges

NEVER operate the Mobile Selection Manifold with a higher inlet operating

pressure than in the "technical data" chapter. A higher setting may cause property

damage and/or injuries.

Functions and performance capabilities5.

5.1 Description

The Mobile Selection Manifold controls the travel speed of the connected hydraulic cylinder

via the distribution of the supplied hydraulic uid.

The Mobile Selection Manifold consists of:

- a control valve (cover sheet, item 1) for dening the direction of movement of the lifting

cylinders (double-acting or single-acting cylinder components) via star knob,

- distribution valve (cover sheet, item 2) with hand wheel for the hydraulic uid distribution

to the connected cylinder,

- pressure relief valves for the extension and retraction (rmly lodged within the device

body) to protect the hydraulic system,

- supply hose (cover sheet, item 4) and return hose (cover sheet, item 3) for the hydraulic

uid supply.

These two hoses are connected via a monocoupling (cover sheet, item 5) or a quick-

disconnect coupling pair to the hydraulic unit,

- Ports A1 and B1 or A2 and B2 are connected to the hydraulic cylinders via a quick-

disconnect coupling pair (cover sheet, item 6).

Safety rules for hydraulic hose lines3.

For more information, consult the separate operating instructions for the hose lines

(116500085).

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Comentarios a estos manuales

Sin comentarios

Lukas MSM-2D mobile control module Manual de usuario Pagina 7

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Lukas MSM-2D mobile control module