Lukas LSI Series Cutter Manual de usuario descargar pdf (Pagina 6)

5.1 Handling of hoses

- never exceed the permissible working pressure as stated on hose and/or literature

- avoid any tension (see ﬁ gure 1) and do not hang any load onto the hose

- never exceed the minimum bend radius as resulting kink will cause failure of hose

(see ﬁ gure 2)

- do not allow hose to contact sharp edges or rough objects (see ﬁ gure 3)

- avoid any twisting of hose (see ﬁ gure 4)

- do not run over hose with any vehicle or equipment ! Hoses which are put on the

surface of sidewalk or street have to be suitably protected (see ﬁ gure 5)

- do not allow hose to contact areas of high temperature such as mufﬂ ers, exhaust

manifold, heaters or burners. Protect the hose as shown in ﬁ gure 6 or install it in

sufﬁ cient distance from the source of heat.

- never interline hose with that of a different manufacturer.

5.2 Protection of the working area in case of breakdown of hoses

Hoses have to be installed or protected in such a way that dangers are prevented, if

possible, in case of breakdown of the hoses.

Danger can be caused by:

- Uncontrolled hose movement after a hose rupture caused e.g. by external inﬂ u-

ence.

- Emerging of the pressure medium under pressure.

- Inﬂ ammation of pressure medium near igniting sources.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Sin comentarios

Lukas LSI Series Cutter Manual de usuario Pagina 6