Lukas SC 357 E2 Manual de usuario descargar pdf (Pagina 26)

2. Remove the two ﬁ xing screws "A" and

remove the protective cover "B". To do

this, ﬁ rst pull the rounded rear edge

outwards and then backwards through

the hand grip, as the edges of the

protective cover adjoining the cylinder

body are kept in place by guide grooves.

If necessary, loosen the hand grip and

move it backwards to obtain sufﬁ cient

space to pull it out. Then remove the

cover caps "C".

3. Move the blade arms on the unit until

the pin "E" and the locking rings "F"

can be accessed through the hole "D".

Now switch off the device and

remove the battery or unplug the

power supply from the device.

Work steps:

1. First of all, carefully clean the rescue equipment.

CAUTION / PLEASE NOTE!

When operating the device with

the hand guard removed, there is

an increased risk of injury caused

by the exposed, moving elements.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 47 48

Sin comentarios

Lukas SC 357 E2 Manual de usuario Pagina 26